ANSI / US · 22 × 34 in
ANSI D paper size
A 22 × 34 inch technical drawing format used for larger engineering, fabrication, and construction plan sheets in North American workflows.
Open in the converterDirect answer
ANSI D dimensions in every unit
In portrait orientation, width comes first: 558.8 mm × 863.6 mm. Rotate the sheet for landscape orientation and the same measurements reverse.
| Unit | Width | Height |
|---|---|---|
| Millimeters | 558.8 mm | 863.6 mm |
| Centimeters | 55.9 cm | 86.4 cm |
| Inches | 22 in | 34 in |
| Points | 1584 pt | 2448 pt |
Digital artwork
ANSI D pixel dimensions by DPI
Pixel dimensions depend on output resolution. These values describe the trimmed page only and do not include printer bleed.
| Resolution | Pixel width | Pixel height | Typical use |
|---|---|---|---|
| 72 DPI | 1,584 px | 2,448 px | Screen preview |
| 96 DPI | 2,112 px | 3,264 px | Screen preview |
| 150 DPI | 3,300 px | 5,100 px | Draft print |
| 300 DPI | 6,600 px | 10,200 px | Quality print |
| 600 DPI | 13,200 px | 20,400 px | High-detail source |
Proportion & comparison
How ANSI D relates to nearby sizes
ANSI D has twice the area of ANSI C. It is 2 inches narrower and 2 inches shorter than 24 × 36 inch ARCH D.
- Portrait ratio
- 1 : 1.5455
- Area
- 0.4826 m²
- Orientation
- 558.8 × 863.6 mm
Works well for
Common ANSI D uses
- Construction plans
- Fabrication drawings
- Engineering schematics
- Plan-set sheets
Check before using
Where it can go wrong
- ARCH D title blocks
- A1 layouts at 100% scale
- Unverified drawing scales
Regional & printer note
Will a printer recognize ANSI D?
A specialist plotter size in the United States and Canada. Print providers may discuss it as ARCH D, but ARCH D is a different 24 × 36 inch sheet.
Always match the document size, print-driver size, paper tray, and physical sheet. A driver can silently scale a page even when the preview looks correct.
Measurement source
Checked against the defining standard
Paper Size Lab converts the stored millimeter measurements mathematically; it does not round-trip between units. The underlying sheet family is referenced to the standards organization below.
Read ASME Y14.1 sheet-size referenceQuestions people ask
ANSI D paper FAQ
What are the dimensions of ANSI D paper?
ANSI D measures 558.8 × 863.6 millimeters, 55.9 × 86.4 centimeters, or 22 × 34 inches in portrait orientation.
How many pixels is ANSI D at 300 DPI?
ANSI D is 6600 × 10200 pixels at 300 DPI before adding bleed.
Is ANSI D the same as another paper size?
ANSI D has twice the area of ANSI C. It is 2 inches narrower and 2 inches shorter than 24 × 36 inch ARCH D.
What is ANSI D commonly used for?
ANSI D is commonly used for construction plans, fabrication drawings, engineering schematics, plan-set sheets. Printer, postal, and finishing requirements still vary.